Commercial Windows

FRAMES FOR INSULATED DOORS

Elton’s injection molded frames deliver the best in quality and appearance for your commercial door. The unique, screw-together design makes installation simple - and our polypropylene frames will not discolor! Please see the chart below for specifications, colors, glass options and door thicknesses.

FRAMES FOR NON-INSULATED PAN DOORS (NID)

Elton’s unique frames will fit most door manufacturers’ ribbed panels. As shown above, the tabs on our 1225 frame fit right into the deep ribs of the door. This saves installation time, as there’s no need to fill the ribs with caulking. Also shown above, the interior frame for a pan door is designed to go right over the deep ribs perfectly, lining up the screw holes with the exterior frame. Keep in mind: you can mix and match Elton frames to fit ribbed or flush sections for pan or insulated doors.

SCREW-TOGETHER WINDOWS
MODEL	OUTSIDE FRAME (Tip-to-tip)	CUT-OUT SIZE	VISION AREA	DOOR THICKNESS
MODEL	OUTSIDE FRAME (Tip-to-tip)	CUT-OUT SIZE	VISION AREA	1/8"	1-3/8"	1-1/2"	1-5/8"	1-3/4"	2"
624	5-3/4" x 24"	4-7/8" x 23-1/8"	3-1/4" x 21-1/2"
824	8" x 24"	7-1/8" x 23-1/8"	5-1/2" x 21-1/2"
1224	13-1/8" x 25-1/8"	11-7/8" x 23-7/8"	9-5/8" x 21-5/8"
Note: 1225 is a 1224 size window for a ribbed door
1225	13-1/8" x 25-1/8"	11-7/8" x 23-7/8"	9-5/8" x 21-5/8"
1634	17-1/8" x 35-1/8"	15-7/8" x 33-7/8"	13-5/8" x 31-5/8"
FOR NON-STANDARD WINDOW THICKNESS PLEASE CALL FOR DETAILS.

GLASS OPTIONS
Glass can be ordered as single pane or insulated units

COMMERCIAL FRAMES
Available in the following colors:
Black, White, Cream, Sandstone, Brown, Silver

STOCK GLASS
Typical lead time: 3-7 business days

Double strength (Annealed/Float) glass - 3mm (1/8”)
Tempered
Acrylic (Plexiglas)
Polycarbonate (Lexan)

SPECIAL GLASS
Typical lead time: 10-14 business days

Polished Georgian Wire
Laminate
Low-E
Argon Filled
Tinted
Reflective
Breather Tubes

CLIP-TOGETHER WINDOWS
MODEL	FRAME SIZE	CUT-OUT SIZE	VISION AREA	DOOR THICKNESS					GLASS OPTIONS
MODEL	FRAME SIZE	CUT-OUT SIZE	VISION AREA	1-3/8"	1-1/2"	1-5/8"	1-3/4"	2"	SEALED PLEXI	SEALED LEXAN
1325	26 3/4" x 14 1/2"	25-5/8" x 13-3/8"	23-13/16" x 11-9/16"
1328	12-7/8" x 28-1/2"	11-3/4" x 27-3/8"	10" x 25-3/4" Corner Cut 2-3/4" Radius
SCEW-TOGETHER WINDOWS
1326	13-5/8" x 26-1/8"	12-5/8" x 25-1/8"	10-7/8" x 23-3/8" Corner Cut 4" Radius
0120	12-15/16" Outside Diameter	11-15/16" Diameter	10-3/16" Inside Diameter
0121	12-15/16" Outside Diameter	11-15/16" Diameter	10-3/16" Inside Diameter


1325	1328


0120	0121	1326

BOX QUANTITIES
MODEL	NID	1-3/8"	1-1/2"	1-5/8"	1-3/4"	1-7/8"	2"	F/O
624	24	18	12	12	12	12	12	18
824	N/A	12	12	12	10	10	10	16
1224	12	8	6	6	6	6	6	8
1225	10	8	6	6	6	6	6	15
1634	N/A	4	4	4	4	4	4	5
1325	N/A	N/A	8	8	N/A	N/A	N/A	N/A
1326	N/A	8	8	8	6	6	6	N/A
1328	N/A	N/A	8	8	N/A	N/A	N/A	N/A
0120	N/A	N/A	16	16	N/A	14	14	N/A
0121	N/A	N/A	16	16	N/A	N/A	N/A	N/A

8400 Lawson Rd. Unit #2, Milton, Ontario L9T 0A4 — Phone: 905 876-1290 — Fax: 905 878-9211

Toll Free: 1 800-297- 8299 — sales@eltonmanufacturing.com — www.eltonmanufacturing.com